KitSound KSBMEVOWH Manuel d'utilisateur télécharger pdf (Page 7)

12 13

Output RMS: 90 W

Satellite drivers:

3" 20 W

4 ohm x 2

Subwoofer:

6.5" 50 W

4 ohm

Output (1 kHz

1 m):

approx. 103 dB

S/N:

75 dB

Frequency response: 30 Hz – 20 kHz

Bluetooth: V4.0

Bluetooth range: up to 10 m

Aux-in: RCA

Aux-out: RCA

Unit size: H115.5 x W420 x D280 (mm)

Weight: 5.8 kg

Charging your device

• To do this, you will need a USB cable which is compatible with your device (not supplied)

• Connect the USB end to the USB charge socket (C)

• Connect the other end to your device

Tweaking the sound

• Press either the Bass (5) or the Treble (6) button

• Use the volume wheel to increase or decrease depending on your personal taste

• Then press either the Bass (5) or the Treble (6) button or wait for a few seconds for the volume wheel to return to being a volume wheel

To connect additional speakers (or even another Boom Evolution)

NOTE: This will only work if the speakers are self ampliﬁed.

• Make sure both systems are off and disconnected from the mains

• Locate the aux input on the other speaker

• Identify the type of connection

• Select the correct cable

• Connect one end of the cable to the aux-out (E) on the Boom Evolution

• Connect the other end of the cable to the aux-in on the speakers

• Turn everything back on

NOTE: It is possible to connect several Boom Evolution speakers together for huge sound.

It is possible to connect a wireless transmission dongle to the aux-out of one Boom Evolution.

It is possible to connect the receiver for that transmission dongle to the aux-in of another Boom Evolution.

The output level of the aux-out will be affected by the volume level of the device you are using.

Speciﬁcations

1 2 3 4 5 6 7 8

Pas de commentaire

KitSound KSBMEVOWH Manuel d'utilisateur Page 7